Asante FH100TX8 User Manual download pdf (Page 14)

Page A-1

Troubleshooting

Monitoring LEDs

The following table describes how to troubleshoot problems with your net-

work and/or the hub by monitoring the hub’s LEDs.

Problem Action

Power LED is off ✔ Make sure the power adapter is connected

to the power outlet and is properly inserted

into the power connector on the hub.

✔ Determine if the outlet is functional by

plugging another device into the recepta-

cle.

Partition LED is

blinking con-

stantly

✔ Make sure the workstation cables do not

exceed the maximum length of 100 meters.

✔ Make sure the workstation cables meet

EIA/TIA 568B speciﬁcations for Category 5

wiring.

✔ Make sure the total network diameter does

not exceed the maximum 205 meters.

✔ Make sure there are no faulty Fast Ethernet

adapters or other equipment on the net-

work.

✔ Note: Collisions are normal in Fast Ether-

net networks; however, excessive colli-

sions may indicate that your network is

overly congested.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

No comments

Asante FH100TX8 User Manual Page 14