Page 8
NetStacker NMM Lite Installation Guide
Installing the
NMM Lite
To install the NMM Lite daughter board, you perform the follow-
ing operations:
❏
Check package contents
❏
Ground yourself
❏
Mount the NMM Lite daughter board on the
RJ45B or RJ21B mother board
∆
If you’ve purchased the NMM Lite as part of a pre-
configured NetStacker hub, it will be already
installed in the hub and ready to use.
Checking Package
Contents
The Asanté NMM Lite package contains the following items:
❏
The Asanté NMM Lite in anti-static packaging
❏
This installation guide
❏
The warranty card
Grounding Requirements
Before you handle the RJ45B or RJ21B mother board and the NMM
Lite daughter board, you must attach the grounding strap (pro-
vided in the package) to your wrist to discharge static electricity
from your body or clothes. Attach the clamp end to the hub chas-
sis, which should already be grounded properly.
Mounting the NMM Lite
Daughter Board
If you have a stack of two or three hubs, you install the mother
board with the mounted NMM Lite daughter board in the base
chassis. To install the NMM Lite daughter board:
1
Remove the Asanté double-height RJ45B or RJ21B
mother board from its anti-static packing and place it
on a grounded, flat surface.
∆
Handle the module by its edges. Do not touch the
connectors or chips.
∆
If the mother board is already installed in the
chassis, remove it and place it on a flat, grounded
surface.
2
Remove the Asanté NMM Lite daughter board from its
anti-static packing.
Comments to this Manuals