Asante FriendlyNet FH100TX5 User Manual

FriendlyNet FH100TX55-Port Fast Ethernet HubUser’s ManualAsanté Technologies, Inc.821 Fox LaneSan Jose, CA 95131

FriendlyNet Fast Ethernet Hub User’s ManualPage 2-5Multiple Hub and Station ConfigurationTo connect two FriendlyNet Hubs and multiple Fast Ethernet net

InstallationPage 2-6Wall Mounting the FriendlyNet HubThe FriendlyNet Fast Ethernet Hub can be mounted to a wall or to the surface of a countertop usin

Page 3-13LED IndicatorsLED IndicatorsThe FriendlyNet FH100TX5 Fast Ethernet hub contains LEDs that represent the following:❏ Power ❏ Collision❏ Link/A

LED IndicatorsPage 3-2Collision LEDThe yellow COL (collision) LED on the hub’s front panel illuminates when two or more stations on the network attemp

Page A-1ATroubleshootingMonitoring LEDsThe following table describes how to troubleshoot problems with your network and/or the hub by monitoring the h

TroubleshootingPage A-2Problem ActionLink LED is off ✔ Make sure the hub is powered on.✔ Make sure the device on the other end is pow-ered on.✔ Make s

Page B-1BSpecificationsFriendlyNet FH100TX5 Fast Ethernet HubStandards❏ IEEE 803.3u 100Base-TX Fast EthernetNetwork Media❏ 100Base-TX unshielded twiste

SpecificationsPage B-2Environment❏ Temperature❏ Operating: 0° C to +40° C❏ Storage: -20° C to +70° C❏ Humidity❏ Operating: 10% to 80% RH❏ Storage:

Page C-1CTechnical SupportContacting Technical SupportTo contact Asanté Technical Support:Telephone (800) 622-7464Fax (408) 432-6018Fax-Back (800) 741

ASANTÉ TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA 95131PHONE: 408.435.8388, 800.662.9686 • FAX: 408.432.7511 • e-mail address: [email protected] •W

Copyright NoticeCopyright 1997 by Asanté Technologies, Inc. All rights reserved. No part of this manual, or any associated artwork, software, product

Page iTable of ContentsIntroduction...1-1FriendlyNet FH100TX5 Fast Ethernet Hub...

Page 1-11IntroductionFriendlyNet FH100TX5 Fast Ethernet HubThank you for purchasing the Asanté FriendlyNet FH100TX5, a 5-port Fast Ethernet Hub design

IntroductionPage 1-2Features❏ Plug-and-Play installation❏ Connects up to five 100Base-TX segments per hub; uplink port can be used to connect to anothe

Page 2-12InstallationInstallation of the FH100TX5 hub consists of the following steps:❏ Plan your 100Base-TX network.❏ Review cabling and voltage requ

InstallationPage 2-2Figure 2-1 Sample 100Base-TX network layoutCabling Requirements100Base-TX requires data-grade (Category 5) UTP (Unshielded Twisted

FriendlyNet Fast Ethernet Hub User’s ManualPage 2-3Connecting Network DevicesBefore you connect the hub to other devices, review the following guideli

InstallationPage 2-4Hub to Hub Connection (Cascading Hubs)To connect two hubs together, follow the instructions and diagram below.▲ Important: When u