Asante NetStacker Hub User Manual download pdf (Page 17)

Placement and Mounting

Page 2-5

Placement and Mounting

This section describes how to mount the NetStacker II on a desktop or shelf.

Hub Location

The location chosen for the NetStacker II hub should be less than 100 meters

from servers, workstations, and other devices.

▲

Important: Category 5 cables are environment-sensitive.

Make sure that the cable route is not too close to electro-

magnetic noise sources such as power lines or ﬂuorescent

lights.

Desktop Mounting

To place the hub on a desktop or shelf:

1 Attach the four rubber feet (supplied) to the bottom of

each corner on the hub. See Figure 2-5.

Figure 2-5 Desktop mounting

2 Place the hub on a ﬂat, stable, horizontal desktop or shelf.

Make sure you allow enough ventilation space between the

hub and surrounding objects.

Rack Mounting

A rack mount bracket is an optional way to mount hubs in standard EIA 19-

inch racks.

1 Align the mounting brackets on the sides of the unit with

the slit over the holes as shown in Figure 2-6.

2 Secure the screws tightly to ﬁx the brackets to the device.

123456789101112

MII

Module

Slot

NS2012

Uplink

Normal

Uplink

100M

10M

COL

Power

NetStacker II

Hub ID Number

10 11

100Mbps

10Mbps

Stackable Dual-Speed Hub

SHBBook Page 5 Wednesday, March 3, 1999 8:03 PM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments

Asante NetStacker Hub User Manual Page 17

Comments to this Manuals

Related products and manuals for Network switches Asante NetStacker Hub