Asante 10T Hub/24 Specifications Page 100

  • Download
  • Add to my manuals
  • Print
  • Page
    / 302
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 99
100
8. Reattach the diskette drive to the bracket assembly.
9. Connect the power and SCSI signal cables through the drive
bracket to the MediaDrives as follows (see Figure 5-16).
n
The SCSI signal cable provides four SCSI connectors. The end of the SCSI
cable that has the SCSI connector farthest away from the other three connec-
tors must be connected to the SiliconExpress IV board.
a. Connect the MediaDrives to the middle two SCSI signal cable
connectors.
b. Connect the drive power cables to the MediaDrives.
c. Connect a SCSI terminator to the SCSI cable end closest to the
MediaDrives.
Figure 5-16 Connecting the MediaDrive Cables
10. Reinstall the diskette drive removed earlier and be sure to reattach
the diskette drive cables if they were removed.
SCSI signal cable
Drive power cable
Terminator
To SiliconExpress IV
board
Page view 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 301 302

Comments to this Manuals

No comments