Asante 10T Hub/24 Specifications Page 186

  • Download
  • Add to my manuals
  • Print
  • Page
    / 302
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 185
186
LCD Interface
The LCD interface provides a direct interface to the MegaDrive
controller. During normal operations, the LCD interface displays the
MegaDrive logo. When the MegaDrive is booted or encounters a fault,
the LCD displays status or informational messages.
You can use the LCD interface to display the following information
about the drive array:
¥ Current SCSI ID
¥ Current time and date
¥ Support system status
¥ RAID status
Use the menu selection control buttons next to the display to select
menus and functions. To make a selection, press the Up or Down
button until the selection is highlighted. Then press the Right button to
advance to the function menu. Press the Left button to return to the
previous screen.
Controller LEDs
The controller displays three LEDs under the activity graph. Table 11-6
shows how to interpret these LEDs referenced in Figure 11-8.
Table 11-6 Controller LEDs
LED Green Red Yellow
Drive module status (left) Normal Drive failure. A drive needs to be
replaced.
Drive data reconstruction
is in progress.
Power supply (middle) Normal A power supply has malfunctioned.
Check the power supply LEDs on
the back of the chassis.
Page view 185
1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 301 302

Comments to this Manuals

No comments