Asante 10T Hub/24 Specifications Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 302
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
88
7. Put on a wrist strap and attach the ground clip to the Avid Media
Processor chassis (see Figure 5-5). You are grounded properly only
if the Avid Media Processor is plugged in.
Always do this before you touch any parts or install components
inside the Avid Media Processor.
c
Semiconductor devices are vulnerable to damage by electrostatic
discharge (ESD). Use an ESD wrist strap or other grounding device
to ensure against electrostatic discharge.
c
Do not dislodge any of the copper EMI strip material in the chassis.
Look for any missing segments before replacing the cover.
Figure 5-5 Discharging Static Electricity
Installing Peripheral Boards
This section explains how to install NuBus boards or to install an
additional Avid peripheral board (such as an additional drive
controller) in the Avid Media Processor.
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 301 302

Comments to this Manuals

No comments