Asante IntraCore 36000 Series User Manual download pdf (Page 173)

User’s Manual 173

15.16.2 Priority Commands (Layer 3 and 4)

The following table lists the layer 3 and 4 priority commands.

Command Function Mode

map ip port Enables TCP class of service mapping GC

map ip port Maps TCP socket to a class of service IC

map ip precedence Enables IP precedence class of service mapping GC

map ip precedence Maps IP precedence value to a class of service IC

map ip dscp Enables IP DSCP class of service mapping GC

map ip dscp Maps IP DSCP value to a class of service IC

map access-list ip Sets the CoS value and corresponding output queue for packets

matching an ACL rule

map access-list mac Sets the CoS value and corresponding output queue for packets

matching an ACL rule

show map access-list ip Shows CoS value mapped to an access list for an interface PE

show map access-list

mac

Shows CoS value mapped to an access for an interface PE

show map ip port Shows the IP port map PE

show map ip precedence Shows the IP precedence map PE

show map ip dscp Shows the IP DSCP map PE

15.17 Multicast Filtering Commands

This switch uses IGMP (Internet Group Management Protocol) to query for any attached hosts that want to

receive a specific multicast service. It identifies the ports containing hosts requesting a service and sends

data out to those ports only. It then propagates the service request up to any neighboring multicast

switch/router to ensure that it continues to receive the multicast service.

Command Groups Function

IGMP Snooping Configures multicast groups via IGMP snooping or static assignment,

sets the IGMP version, displays current snooping and query settings,

and displays the multicast service and group members

IGMP Query Configures IGMP query parameters for multicast filtering at Layer 2

Static Multicast Routing Configures static multicast router ports

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 384 385

No comments

Asante IntraCore 36000 Series User Manual Page 173