340 Asanté IntraCore 36000 Series
Console(config)#sntp server 10.1.0.19
Console#
Related Commands
sntp client
sntp poll
show sntp
16.211 spanning-tree
This command enables the Spanning Tree Algorithm globally for the switch. Use the no form to disable it.
Syntax Description
[no] spanning-tree
Default
Spanning tree is enabled.
Command Mode
Global Configuration
Usage Guidelines
The Spanning Tree Algorithm (STA) can be used to detect and disable network loops, and to provide
backup links between switches, bridges or routers. This allows the switch to interact with other bridging
devices (that is, an STA-compliant switch, bridge or router) in your network to ensure that only one route
exists between any two stations on the network, and provide backup links that automatically take over when
a primary link goes down.
Example
This example shows how to enable the Spanning Tree Algorithm for the switch:
Console(config)#spanning-tree
Console(config)#
16.212 spanning-tree cost
This command configures the spanning tree path cost for the specified interface. Use the no form to restore
the default.
Syntax Description
spanning-tree cost cost
no spanning-tree cost
Comments to this Manuals