User’s Manual 355
Default
1 stop bit
Command Mode
Line Configuration
Example
To specify 2 stop bits, enter this command:
Console(config-line)#stopbits 2
Console(config-line)#
16.231 switchport acceptable-frame-types
This command configures the acceptable frame types for a port. Use the no form to restore the default.
Syntax Description
switchport acceptable-frame-types {all | tagged}
no switchport acceptable-frame-types
all The port accepts all frames, tagged or untagged.
tagged The port only receives tagged frames.
Default
All frame types
Command Mode
Interface Configuration (Ethernet, Port Channel)
Usage Guidelines
When set to receive all frame types, any received frames that are untagged are assigned to the default
VLAN.
Example
The following is sample output from the switchport acceptable-frame-types command.
This example shows how to restrict the traffic received on port 1 to tagged frames:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport acceptable-frame-types tagged
Console(config-if)#
Comments to this Manuals